|
Structure and characteristics of the
The pump structure. New glume, structure, unique;Avoid the filling and thick
More difficult is not enough, make in a security side, high work rate.this
Principal by electric machine, the machine speed reduction device, increase pressure worm pole, increase pressure
Son, pressure processing, material, group, such as electric control system, when using
Spray protector, also including jet ejector, under its special points such as:
1, operating as a defence of simple, can rely on high, with imports
Device.
2, which gives simple and wheel type design, mobile party then.
3, can fill slurry liquid water-cement ratio around big, don't should be high
Strong degree of labor demand thick.
4, can be note thick liquid liquid than the big grey sand, sand grain of grain diameter range
Wide;
5, and even to continue filling slurry, avoid the pump over large instantaneous
|
|
Pulse pressure force.
6, by dynamic pressure.When the slurry liquid filling, pressure force gathering
Up high, then to control and keep filling slurry pressure force.
7, after the slurry pressure reach to the design pressure forces, can turn the discharge
Because of the pressure.
8, used in plate material, with secondary stirring mixer set
Use.
Nine, with air compressor and spray injector, industry can be made into line
Table surface spray.
Comfortable with van
This machine can be extensively used in road, rail road tunnel and city
Iron, chamber, such as under water electricity station to anchor solid filling slurry injection process and pressing force
Note pulp engineering, but also to use in engineering outside wall bottom layer and the surface
|
